SiteHome

Shop All FR Clothing by Carhartt | Black Stallion | Bulwark | Stanco

WorkwearFR Workwear

FR Clothing — Flame Resistant Shirts, Jackets, Pants & Workwear

Masterman's stocks flame resistant (FR) clothing from Carhartt, Bulwark, Black Stallion, Tillman, and Weldas — including FR shirts, FR jackets and coats, FR pants, FR coveralls, FR welding aprons, FR protective sleeves, and hi-vis FR vests. Same-day shipping from Auburn, MA to New England facilities. No order minimums.

Workers in electrical, welding, oil and gas, and transportation industries face hazards that standard workwear can't address. When an arc flash event or flash fire occurs, clothing that ignites, melts, or continues to burn dramatically increases injury severity. Flame resistant clothing — FR clothing — is engineered to self-extinguish and resist ignition, limiting burn injury in those critical seconds after a thermal event. Masterman's carries FR clothing from the brands New England industrial buyers trust, covering every layer from FR shirts and base layers to FR jackets and outerwear.

The FR clothing selection at Masterman's spans the full range of applications — from the electrical worker who needs NFPA 70E-compliant arc flash protection, to the pipeline crew that needs NFPA 2112-compliant flash fire protection, to the welder who needs FR cotton jackets and sleeves that hold up to spatter and spark exposure. Carhartt, Bulwark, Black Stallion, Tillman, and Weldas are all stocked in Auburn, MA for same-day shipment.

FR Shirts

FR shirts from Carhartt, Black Stallion, and Bulwark form the foundational FR clothing layer for workers in electrical, oil and gas, and welding environments. Worn as the primary layer or as an underlayer beneath FR jackets and coats, FR shirts provide direct skin protection — which is where burn injury ultimately occurs if outer layers fail or are not present.

Carhartt FR shirts are a staple for construction and industrial workers who need compliance without sacrificing the durability Carhartt is known for. Bulwark FR brings a more technical approach to arc-rated garments, with specific ATPV ratings across their shirt line for workers in environments that require documented arc protection levels. Black Stallion FR shirts cover the welding-focused end of the spectrum with options designed for spatter resistance and daily wear on the weld floor.

Shop FR shirts from Carhartt, Bulwark, and Black Stallion at Masterman's

FR Jackets and Coats

FR jackets and coats are the outer layer for workers in environments where full-body flame protection is required, or where the temperature demands an additional layer that still meets FR compliance. Masterman's carries FR cotton jackets from Tillman, Black Stallion, and Weldas — each bringing a different approach to construction, comfort, and coverage.

The Tillman 6230DRQ is a 9 oz high-visibility orange FR cotton welding jacket built for MIG and TIG welding environments. Black Stallion's FR jacket line spans both leather construction (the 36WC split cowhide with Kevlar stitching, 36-inch length) and FR cotton options including the BSX Contoured FR Cotton jacket and the TruGuard 200 line. Weldas brings the 33-8060 COOL FR Hybrid jacket — a washable 9 oz navy FR cotton option designed for environments where the jacket goes through regular laundering.

Shop FR welding jackets and FR coats at Masterman's

FR Pants and FR Jeans

A complete FR clothing system requires FR pants alongside FR shirts — wearing FR on the upper body without FR protection on the legs leaves a significant gap in burn injury prevention. Masterman's carries FR pants and FR jeans from Carhartt and Bulwark in styles built for daily industrial wear. Carhartt FR pants are available in work pant and dungaree styles sized for a full range from Small through Tall options. Bulwark FR pants address the more technical end with specific arc ratings documented for environments requiring measured HRC compliance.

See the full FR pants and FR jeans selection at Masterman's for current styles and sizing.

FR Coveralls and FR Overalls

FR coveralls provide full-body flame protection in a single-layer garment — the most straightforward approach to FR compliance in environments where workers need head-to-toe coverage without layering separate FR shirt and FR pants. Masterman's carries FR coveralls from Bulwark and other brands across multiple styles, sizes including extended tall options, and both disposable and reusable constructions. FR overalls are also available for environments where the upper body will be covered separately.

Browse FR coveralls and FR overalls at Masterman's.

FR Welding Aprons and FR Protective Sleeves

FR welding aprons and FR protective sleeves address the focused exposures that full FR clothing doesn't always cover efficiently. Welding aprons protect the torso and upper legs from spatter and spark contact during MIG and TIG welding, adding a targeted protection layer over FR clothing or standard workwear. Tillman FR protective sleeves cover the wrist and arm gap between glove cuff and jacket sleeve — one of the most common spatter contact points during welding.

Pair FR sleeves with Tillman welding gloves at Masterman's for continuous protection from fingertip to shoulder.

Hi-Vis FR Vests

For workers in environments that require both flame resistance and high-visibility compliance — road construction crews, utility workers, and pipeline operations near traffic — hi-vis FR vests combine ANSI-rated high-visibility with FR performance. Masterman's carries hi-vis FR vests for the demanding overlap of these two compliance requirements, providing a single garment that addresses both instead of a compromise between them.

See the complete hi-vis clothing range at Masterman's including hi-vis FR options.

FR Clothing Applications by Industry

Electrical and utilities workers face arc flash exposure — an explosive release of energy that occurs during an electrical fault. NFPA 70E establishes the arc flash protection requirements for electrical work, including specific arc ratings (ATPV in cal/cm²) for garments at different hazard categories. Bulwark and Carhartt FR clothing at Masterman's covers the documented arc ratings that electrical workers need to meet site safety requirements.

Oil and gas workers face flash fire exposure from ignited vapors and gases. NFPA 2112 establishes flash fire protection requirements, and FR clothing meeting this standard self-extinguishes to limit the duration of flame contact on the body. Carhartt and Bulwark FR both produce garments tested to NFPA 2112.

Welders face spatter, spark, and radiant heat exposure throughout every shift. The priority in welding FR clothing is construction quality and durability as much as flame resistance — a welding jacket that wears through, tears at seams, or loses protection after repeated laundering is a compliance problem waiting to happen. Tillman, Black Stallion, and Weldas are all specifically engineered for the welding environment rather than adapted from general FR platforms.

Transportation drivers and pipeline crews operating in environments with hydrocarbon fire risk need FR clothing that holds up through a workday of physical activity — getting in and out of vehicles, working in confined spaces, and operating in variable weather. Carhartt's durability-first approach to FR is specifically popular in this segment.

Choosing FR Clothing

Electrical/arc flash environments — Bulwark FR (documented ATPV ratings) or Carhartt FR (NFPA 70E compliant)
Oil and gas/flash fire environments — Carhartt FR or Bulwark FR (NFPA 2112 compliance)
Welding environments — Tillman FR cotton, Black Stallion FR cotton or leather, Weldas COOL FR Hybrid
Full-body coverage — FR coveralls from Bulwark; FR aprons for focused protection
Wrist/arm protection gap — Tillman FR protective sleeves
Visibility + FR compliance — hi-vis FR vests for road and utility environments

Frequently Asked Questions

Q1. What FR clothing brands does Masterman's carry?

Masterman's stocks FR clothing from Carhartt, Bulwark, Black Stallion, Tillman, and Weldas — covering FR shirts, FR jackets and coats, FR pants, FR coveralls, FR welding aprons, FR protective sleeves, and hi-vis FR vests.

Q2. What is FR clothing?

FR clothing — flame resistant clothing — is workwear engineered to self-extinguish and resist ignition when exposed to flame or an arc flash event. FR garments do not eliminate burn injury risk but significantly reduce injury severity by limiting the time the fabric remains on fire and preventing the fabric from melting onto the skin.

Q3. What is the difference between NFPA 70E and NFPA 2112 FR clothing?

NFPA 70E establishes arc flash protection requirements for electrical workers, with garments rated by ATPV (arc thermal performance value) in cal/cm². NFPA 2112 establishes flash fire protection requirements for oil and gas workers. Some FR garments are tested to both standards; Bulwark and Carhartt both produce FR clothing compliant with each. Check individual garment documentation for specific ratings.

Q4. What is an ATPV rating on FR clothing?

ATPV stands for Arc Thermal Performance Value — a rating in cal/cm² that indicates how much arc flash energy a garment can absorb before the wearer has a 50% probability of receiving a second-degree burn. Higher ATPV = higher arc flash protection. Match the garment's ATPV to the arc flash hazard category present at the work site.

Q5. Do I need to wear FR pants with FR shirts?

Yes. A complete FR clothing system covers both the upper and lower body. Wearing FR shirts without FR pants leaves legs unprotected. Burns to the legs can be as severe as burns to the upper body. Masterman's carries Carhartt and Bulwark FR pants to complete the system.

Q6. Does Masterman's carry Carhartt FR clothing?

Yes. Masterman's stocks Carhartt FR shirts and FR pants for electrical, oil and gas, and general industrial workers who need durable flame resistant workwear.

Q7. What is the Tillman 6230DRQ FR welding jacket?

The Tillman 6230DRQ is a 9 oz high-visibility orange FR cotton welding jacket designed for MIG and TIG welding environments. Available in multiple sizes from Small through 6XL at Masterman's.

Q8. Does Masterman's carry FR clothing for welding?

Yes. Masterman's stocks FR cotton welding jackets from Tillman, Black Stallion, and Weldas, along with leather welding jackets from Black Stallion, FR protective sleeves from Tillman, and FR welding aprons.

Q9. Does Masterman's ship FR clothing same day?

Yes. In-stock FR clothing ships same day from Masterman's Auburn, MA warehouse to customers across Massachusetts, Connecticut, Rhode Island, New Hampshire, Vermont, and Maine. No order minimums.

Q10. Can Masterman's help me identify the right FR clothing for my job site's requirements?

Yes. Contact Masterman's at 800-525-3313 for guidance on FR clothing selection for specific arc flash categories, NFPA standards, or welding applications. The team supplies FR clothing to industrial and construction operations across New England.